Setting Jaringan Summarization Sederhana
Pertama buka aplikasi Packet Tracer 5.3 , terus buat jaringan seperti yang ada dibawah ini: Konfigurasi Router0: Router>ena Router#conf t Enter configuration commands, one per line. End with CNTL/Z. Router(config)#int fa0/0 Router(config-if)#ip add 172.16.10.1 255.255.255.0 Router(config-if)#no sh %LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up Router(config-if)#exit Router(config)#int ser2/0 Router(config-if)#ip add 172.16.5.1 255.255.255.0 Router(config-if)#no sh %LINK-5-CHANGED: Interface Serial2/0, changed state to down Router(config-if)#clock rate 64000 Router(config-if)#exit Router(config)# %LINK-5-CHANGED: Interface Serial2/0, changed state to up %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial2/0, changed state to up Router(config)#ip route 192.168.0.0 255.255.252.0 ser2/0 Router(config)#exit %SYS-5-CONF